12V Heated Motorcycle Gear

Stay out on the road longer with heated gear.

Who ever said that cold temperatures marked the end of the motorcycle riding season apparently had never used 12V Heated Motorcycle Gear. VentureHeat is committed to extending the riding season long into the winter so that as long as you have traction, you are ready to ride.  12V Heated Motorcycle Gear from VentureHeat includes head to toe heated apparel to keep you warm no matter how cold the temperature falls.

Heated motorcycle gear not only enables you to ride longer during the cold weather, but also ride more comfortably and more safely.  By regulating your body temperature, you can focus your entire attention on the road ahead rather than having to deal with cold temperatures which can limit your mobility and control over the bike while out on a ride.

Each item in the 12V Heated Gear lineup includes a battery harness and built-in fuse.  After a quick set-up of connecting the harness to the terminals on the battery, you are ready to experience the luxury of having heated comfort during your ride.

VentureHeat offers a variety of products to keep you warm, from the Heated Motorcycle Jacket Liner,  12V Heated Vests, 12V Heated Pant Liners, Heated Motorcycle Boot Liners, as well as Heated Motorcycle Gloves and Glove Liners.

All of VentureHeat’s Heated 12V Gear can be connected together using only one battery harness.  They also feature multi-zone temperature controls for an even greater degree of customization.  For instance, let’s say you choose to wear a complete outfit of heated gear with a Heated Jacket Liner, Heated Gloves, Heated Pant Liners, and Heated Insoles. With the temperature controllers that come standard with both the Heated Jacket Liner and Heated Pant Liners, (as well as the Heated Vests), you can control the heat on your upper body with a separate setting than your lower body.

The Heated Jacket Liner features pre-wired connectors in a concealed zip-up pocket near the cuffs to quickly plug in the Heated Gloves.  The Heated Pant Liners have a similar feature for the Heated Insoles. Configuring your gear in this manner allows you to control the temperature for both your jacket and gloves with one controller while the other controller adjusts your pants and insoles.  You will find this highly beneficial when out on the road especially if your hands and chest are prone to getting colder than the rest of your body.


After getting off your motorcycle, the quick release coax connectors easily unhook so you will never have to worry about tipping your bike over in the event that you forget to unhook the cables before walking away.  The connectors on the clothing can quickly be hidden away in the discreet, zippered pockets.  This feature is highly desirable in situations where you are wearing your motorcycle gear after you get off the bike, like when stopping to get something eat or refueling.

The idea behind the design of the heated motorcycle gear is to maintain a neutral look.  The clothing is constructed to be thin enough to be worn under you usual motorcycle gear.  That way, you can still maintain the same style you desire with the added bonus of being able to wear heated gear underneath.

All of the Heated Motorcycle Gear uses hair-thin micro fibers in the heating elements.  Unlike other companies that use bulky cables and coils to heat the clothing, VentureHeat’s apparel is both coil-free and cable-free.  The Xtreme Comfort Technology (XCT) heating panels provide maximum warmth while maintaining their flexibility.  The heating panels move freely with the fabric of the clothing itself, so you will never notice any obtrusive or uncomfortable cables that many of the other heated clothing companies use.

Learn more about the VentureHeat’s XCT heating panels.

We know that you love to ride, now you can more comfortably.  Check out our selection of 12V Heated Motorcycle Gear to stay out on the road longer.

The Perks of a Heated Car Seat Cover

The Perks of a Heated Car Seat Cover

Starting your car after it has sat overnight in the cold is never something you look forward to in the morning.  Waiting for the heater to kick in can take your entire drive before you start to feel warm air blowing out of the vents. Your other options are to either let your car idle and warm up while you wait inside or to pay extra and upgrade to a newer, more luxurious car with heated seats.  Unfortunately neither of these choices are the most feasible for your schedule or realistic from a financial standpoint.

It is time for you to experience a warming sensation throughout your entire body with the affordable and timely solution of VentureHeat’s Heated Car Seat Cover.  Simply slip the stretchable polyester-mesh cover over your seat and plug the 12-volt cigarette plug into your car’s adaptor.  When you turn the car on, power will immediately begin to heat the seat cover.  You will no longer have to wait for your engine to heat up to feel the warmth like you do when you turn the heater on, because heat will be drawn as soon as you turn the key.

The heating elements are strategically positioned along the seat and back rest for continuous soothing warmth.  With a layer of foam, the heated car seat cover not only provides instant heated warmth, but serves as a comfortable cushion as well.

Coming in gray, tan, and black styles, you are able to choose a heated seat cover that complements your car.  When you are ready for luxurious heat, simply press the button found on the included temperature controller.  This allows you to select between varying levels of heat so that you can maximize your overall comfort.  By warming your core, your body’s blood circulation will improve to spread heat throughout your entire body.  This means that if you tend to get cold fingers or toes while driving, a heated car seat cover could help to warm and relax your extremities even though the heat is centralized along your backside.

The heated car seat cover also works great for the passenger seat as its versatile design is built to fit nearly any car’s bucket seats.  So whether you have a friend or relative that tends to get cold, or are out on a date, the heated car seat cover will produce relaxing warmth whenever it’s needed.

When you have been sufficiently warmed and no longer need the extra boost of warmth, simply press the power button to turn off the heat.  Temperature adjustments can be made on-the-go with just the click of a button so that you can keep your focus on the road.

If you are ready to say goodbye to chilly car rides, take a look at the heated car seat cover for hours of comfortable heat.

How Does 12V Heated Gear Work?

From installation to using your 12V heated gear.

VentureHeat offers a full line of heated motorcycle gear that is powered by the existing 12V battery found on a motorcycle or snowmobile.

For an example, let’s refer to the 12V Heated Jacket Liner. The 12V Heated Jacket Liner comes with a battery harness, a built in fuse, and temperature controller.

VentureHeat features a revolutionary micro-alloy heating fibers that do away with cables and coils running through the jacket.  The heating panels are pliable and flexible, allowing them to fit naturally inside of the liner without you even noticing them.

The heating elements are carefully positioned on the front, back, collar and sleeves of the jacket liner to speed up the body’s circulation and spread heat throughout your entire body.  The durable wind-resistant nylon fabric will protect you from the elements while the fleece collar helps to trap and keep heat on your body.

Installing the Battery Harness

Before you use the clothing, you must first connect the battery harness to the battery making sure that the power has been turned off.  Access the vehicle’s 12V battery by following the instructions in the vehicle’s owners manual.

Connect the battery harness to the terminals of the battery by removing the attachment screws then connecting  the red ring of the battery harness to the positive terminal and black ring to the negative terminal.   An SAE adapter can also be purchased to use with an existing battery tender.

Tuck the remaining wires under the seat and run the plug out to the left side making sure that at least a couple of inches from the plug to extend from the body of the vehicle.  The location and manner in which this is done will vary depending on the configuration of the vehicle and can also be attached to the frame using cable ties or electrical tape to secure the wire.  Return any vehicle body panels or equipment to their original location.

Using the Heated Jacket Liner

Once you have completed installing the battery harness, locate the input plug found inside of the jacket on the left side in the lower pocket.  Remove the plug from the jacket and connect the coax cable to the battery harness attached to the vehicle.

To use the included temperature controller to regulate the heat levels, connect the controller to the plugs found inside of the left side of the jacket.

To turn on the power, press and hold the power button for two seconds.  When first turned on, the controller will start on the maximum heat setting and will display a blue light.  To adjust the temperature, click the power button once to change the setting to the high setting with a red light. Click the button again to adjust the heat to a medium temperature with a yellow light and click the button again to change the heat to the low setting with a green light.  To turn the power off, press and hold the power button for two seconds until the lights on the controller turn off.

The controller can be tucked away inside the liner of the jacket, or attached to the vehicle itself depending on your preferences.

Additional Features

The same controller used to adjust the heated jacket’s temperature will also control our 12V heated gloves and heated glove liners.  To use the 12V heated gloves with the heated jacket liner, find the plug inside of the zippered pocket near the cuffs on the jacket.  Connect the coax cable from the heated jacket to the gloves and tuck any excess wire back into the sleeve of the jacket.

The 12V Heated Jacket Liner is also compatible with the 12V Heated Pant Liners using the same battery harness.  Simply purchase a Y adapter and connect both the heated jacket liner and heated pant liners into it.  The same is true if both you and a passenger are wearing heated gear.  See vehicle’s owners manual for power output information.

The total setup takes under 10 minutes to complete, but will keep you warm all year round.

For more information, check out our 12V Technology Page.

Heated Gear for Beginners

The 411 on heated apparel.

If you are new to heated gear, you may be wondering how exactly it works, or why you hadn’t thought of it sooner.  We’ve all been in situations where our conventional outerwear lacks the ability to effectively keep us warm.  Perhaps you have thought, “Wouldn’t it be great if my clothes had little heaters in them to keep me warm?”  Well, that is exactly what VentureHeat has achieved with their entire line of heated apparel.

Heated clothing in general is a rather simple concept.  It works by using the power provided by a battery and uses conductive resistors to transfer heat throughout the garment.

Traditional heated gear is constructed using stiff resistor cables and coils.  A major drawback of this method of heating is that the cables and coils tend to create hot spots which can burn your skin.  Also, because heat is not spread evenly throughout your body, you will be left cold in other areas.  In an attempt to fix this problem and disperse heat evenly, extra insulation is added which creates added bulk and restricts your mobility.  The downsides of heating outerwear in this manner can create more troubles than they are worth.

Thankfully, with years of research, product testing, and development, VentureHeat has pioneered a solution for these problems with Xtreme Comfort Technology (XCT) which leads the industry in tech-enabled heated outerwear.

The XCT heating system features hair-thin micro fiber heating elements which are both pliable and flexible.

The Xtreme Comfort Technology is coil-free allowing for a lightweight and less intrusive design.  The efficient heating system provides instantaneous and consistent heat levels throughout your entire body.

Because of the flexibility that the XCT system enables, you are able to move freely about without restrictive cables or coils impeding your movement.  The micro fibers are integrated into heating panels which are strategically placed throughout the garment for supreme overall warmth. Take a look at the Xtreme Comfort Technology video for more information.

VentureHeat’s Heated Outerwear utilize rechargeable 7.4 Volt lithium ion batteries to provide you with safe, consistent, and long lasting warmth. Depending on the settings you choose, you can experience heated comfort for up to 5 straight hours of use.  With quick recharge times using the included wall adaptor, you can have heated warmth day in and day out.

VentureHeat also features temperature controllers that come standard with all of their rechargeable battery heated garments whereas many of the competitors charge extra for the ability to modulate the heat settings.  VentureHeat’s controllers are easy to use and allow you to select the appropriate temperature level with just the click of a button.  The whole idea behind heated clothing in the first place is to maximize comfort.  A temperature controller gives you the piece of mind of not having to worry about being either too hot or too cold as you can pinpoint which setting is right for you whenever you’d like.

Both the batteries and controllers are ultra slim allowing them to  fit discreetly inside of the hidden pockets found in the liner of the clothing.  The stealthy technology allows you to easily conceal the components from view and allows the heated apparel to look like traditional non-heated clothing.

You will surely find a style that matches your desires in the wide selection of modern designs from VentureHeat.  They include great deals in heated jackets, heated vests, heated gloves, and more.  Browse the VentureHeat collection today to start experiencing the joys of heated apparel.

Heat On Demand

Giving you that boost of heat when and where you need it.

Have you ever wished that you could control the weather? Now with VentureHeat’s Heat on Demand feature, you can do just that.

Imagine if you could take the warmth of your fireplace with you when you head outside.  VentureHeat makes this possible through safe and portable heating elements that provide you with soothing warmth when and where you need it most.

If you have ever experienced having to pile on layers of clothing to stay warm during a chilly morning only to have to shed your outer layers by mid afternoon as the day warms up, then you know the hassles that come with variable weather.

You will never have to accept being too cold or too hot again as the Heat on Demand feature allows you to dial in the perfect micro-climate that matches your personal preferences.

While traditional cold weather gear attempts to trap body heat between layers of bulky insulation that impedes mobility and compromises style, VentureHeat uses the latest technology in lithium-ion batteries to power the tri-zone heating panels that eliminate bulk while maximizing comfort and performance.

By boosting your body’s blood circulation through regional heating, you will begin to feel gentle warmth throughout your entire body for up to 5 straight hours.

VentureHeat’s apparel is styled as appealing modern outerwear, giving no indication from sight alone that it differs from conventional non-heated gear.

If you’re ready for total comfort and total control during the cold weather, then you’re ready for VentureHeat.